Use the multi-headphone skills: blue is an audio input interface, of course, through the four-channel settings can be blue into audio output interface, that is, support six-channel motherboard at the same time connect two headphones, but through the audio drive from With the software to set up, the same reason, eight-channel integrated motherboard can connect more than two headphones, so many people watching movies at night no longer afraid to others.Audio Sketchpad

Integrated eight-channel audio chip with six 3.5mm audio interface in general, due to the original six-channel basis to increase the three interfaces in the division of labor is more delicate, to avoid setting up multi-channel at the expense of the microphone and audio input Of the function, thus reducing the application of repeated trouble. Black: rear surround speaker connector, used in four-channel / six-channel / eight-channel sound settings, can be used to connect rear surround speakers. Orange: Center / Subwoofer connector for use in a six-channel / eight-channel sound setting for connecting center / subwoofer. Gray: side surround speaker connector, in the eight-channel sound settings, can be used to connect the side of the surround speakers.Audio Sketchpad

Test method to connect the multi-speaker: When you buy multi-channel speaker, in the process of connecting in addition to the above description, but also through the exclusion test, only one interface to listen to the sound effects, until the best results, such as After the test surround the speaker, you can unplug the other only to connect the black audio for audition.

Chassis front audio "no sound" is why the sound card driver installed correctly, the headset inserted in the back of the chassis on the back of the audio output interface can have a voice, plug in the front audio interface, no sound how to do. In the rear audio interface can correctly output the sound, and the front audio interface without sound output for two reasons, the first reason is that the front audio interface, the audio cable is not properly connected to the motherboard, as long as the front Set the audio interface board has a lot of data lines corresponding to the corresponding pin on the motherboard. The second reason is that the audio-driven control panel is set incorrectly.Audio Sketchpad